Matt lacquer
Types of printing machines : Flexo and rotogravure (preferably rotogravure)
Types of printable films : BOPP. PVC. PES. PE Films
Physical and chemical properties :
Pigment type : organic & inorganic
Type of resin : Artificial
The type of solvent : Alcohol and ester
solid percent : 25%
Viscosity : Minimum 25 seconds (Ford Cup 4 mm at 25 ° C)
Drying time : For 5 to 9 seconds at 25 degrees Celsius
Diluent solvent for rotogravure: A mixture of isopropanol (or ethanol), ethyl acetate in a ratio of 3: 1 or pure ethyl acetate
Accelerator drying time : Ethyl acetate or MEK:
retarder Ethyl glycol or methoxypropanol:
Description:
- This lacquer should be applied on the opposite side of the print surface to have the maximum effect.
- Stir thoroughly before consumption.
- The amount of dry film coverage for matting depends on the matte desired.
packaging 18 Kg:
Warehousing : For 6 months in closed containers at a temperature of 20 to 25 degrees Celsius
English 
Persian
No comments